Home > Rocket > PROPELLANTS - NASA

PROPELLANTS - NASA

what is rocket fuel
habboin 05/02/2022 Rocket 2664
6. PROPELLANTSA. GENERAL FEATURES OF ROCKET PROPELLANTSChemical propellants in common use deliver specific impulse values ranging from about 175 up to about 300 seconds. The most energetic chemical pr...
6. PROPELLANTSA. GENERAL FEATURES OF ROCKET PROPELLANTS

Chemical propellants in common use deliver specific impulse values ranging from about 175 up to about 300 seconds. The most energetic chemical propellants are theoretically capable of specific impulses upto about 400 seconds.

High values of specific impulse are obtained from high exhaust-gas temperature, and from exhaust gas having very low (molecular) weight. To be efficient, therefore, a propellant should have a large heat of combustion to yield high temperatures, and should produce combustion products containing simple, light molecules embodying such elements as hydrogen (the lightest), carbon, oxygen, fluorine, and the lighter metals (aluminum, beryllium, lithium).

Another important factor is the density of a propellant. A given weight of dense propellant can be carried in a smaller, lighter tank than the same weight of a low-density propellant. Liquid hydrogen, for example, is energetic and its combustion gases are light. However, it is a very bulky substance, requiring large tanks. The dead weight of these tanks partly offsets the high specific impulse of the hydrogen propellant.

Other criteria must also be considered in choosing propellants. Some chemicals that yield excellent specific impulse create problems in engine operation. Some are not adequate as coolants for the hot thrust-chamber walls. Others exhibit peculiarities in combustion that render their use difficult or impossible. Some are unstable to varying degrees, and cannot be safely stored or handled. Such features inhibit their use for rocket propulsion.

Unfortunately, almost any propellant that gives good performance is apt to be a very active chemical; hence, most propellants are corrosive, flammable, or toxic, and are often all three. One of the most tractable liquid propellants is gasoline. But while it is comparatively simple to use, gasoline is, of course, highly flammable and must be handled with care. Many propellants are highly toxic, to a greater degree even than most war gases; some are so corrosive that only a few special substances can be used to contain them; some may burn spontaneously upon contact with air, or upon contacting any organic substance, or in certain cases upon contacting most common metals.

Also essential to the choice of a rocket propellant is its availability. In some cases, in order to obtain adequate amounts of a propellant, an entire new chemical plant must be built. And because some propellants are used in very large quantities, the availability of raw materials must be considered.

42ASTRONAUTICS AND ITS APPLICATIONS 43B. SOLID CHEMICAL PROPELLANTS

Two general types of solid propellants are in use. The first, the so called double-base propellant, consists of nitrocellulose and nitroglycerine, plus additives in small quantity. There is no separate fuel and oxidizer. The molecules are unstable, and upon ignition break apart and rearrange themselves, liberating large quantities of heat. These propellants lend themselves well to smaller rocket motors. They are often processed and formed by extrusion methods, although casting has also been employed.

The other type of solid propellant is the composite. Here, separate fuel and oxidized chemicals are used, intimately mixed in the solid grain. The oxidizer is usually ammonium nitrate, potassium chlorate, or ammonium chlorate, and often comprises as much as four-fifths or more of the whole propellant mix. The fuels used are hydrocarbons, such as asphaltic-type compounds, or plastics. Because the oxidizer has no significant structural strength, the fuel must not only perform well but must also supply the necessary form and rigidity to the grain. Much of the research in solid propellants is devoted to improving the physical as well as the chemical properties of the fuel.

Ordinarily, in processing solid propellants the fuel and oxidizer components are separately prepared for mixing, the oxidizer being a powder and the fuel a fluid of varying consistency. They are then blended together under carefully controlled conditions and poured into the prepared rocket case as a viscous semisolid. They are then caused to set in curing chambers under controlled temperature and pressure.

Solid propellants offer the advantage of minimum maintenance and instant readiness. However, the more energetic solids may require carefully controlled storage conditions, and may offer handling problems in the very large sizes, since the rocket must always be carried about fully loaded. Protection from mechanical shocks or abrupt temperature changes that may crack the grain is essential.

C. LIQUID CHEMICAL BIPROPELLANTS

Most liquid chemical rockets use two separate propellants: a fuel and an oxidizer. Typical fuels include kerosene, alcohol, hydrazine and its derivatives, and liquid hydrogen. Many others have been tested and used. Oxidizers include nitric acid, nitrogen tetroxide, liquid oxygen, and liquid fluorine. Some of the best oxidizers are liquified gases, such as oxygen and fluorine, which exist as liquids only at very low temperatures; this adds greatly to the difficulty of their use in rockets. Most fuels, with the exception of hydrogen, are liquids at ordinary temperatures.

Certain propellant combinations are hypergolic; that is, they ignite spontaneously upon contact of the fuel and oxidizer. Others require an igniter to start them burning, although they will continue to burn when injected into the flame of the combustion chamber.

In general, the liquid propellants in common use yield specific impulses superior to those of available solids. On the other hand, they require more complex engine systems to transfer the liquid propellants

87162 °-59-4

44 ASTRONAUTICS AND ITS APPLICATIONS

to the combustion chamber. A list showing solid- and liquid-propellant performance is given in table 1.

TABLE 1.-Specific impulse of some typical chemical propellants 1Propellant combinations: Isp RangeMonopropellants ( liquid ):(sec)Low-energy monopropellants________________________ 160 to 190.HydrazineEthylene oxideHydrogen peroxideHigh-energy monopropellants:Nitromethane_______________________________ 190 to 230Bipropellants (liquid):Low-energy bipropellants___________________________ 200 to 230.Perchloryl fluoride-Available fuelAnaline-AcidJP-4-AcidHydrogen peroxide-JP-4Medium-energy bipropellants________________________ 230 to 260.Hydrazine-AcidAmmonia-Nitrogen tetroxideHigh-energy bipropellants___________________________ 250 to 270.Liquid oxygen-JP-4Liquid oxygen-AlcoholHydrazine-Chlorine trifluorideVery high-energy bipropellants_______________________ 270 to 330.Liquid oxygen and fluorine-JP-4Liquid oxygen and ozone-JP-4Liquid oxygen-HydrazineSuper high-energy bipropellants_______________________ 300 to 385.Fluorine-HydrogenFluorine-AmmoniaOzone-HydrogenFluorine-DiboraneOxidizer-binder combinations ( solid ):Potassium perchlorate:Thiokol or asphalt_____________________________ 170 to 210.Ammonium perchlorate:Thiokol_____________________________________ 170 to 210.Rubber_____________________________________ 170 to 210.Polyurethane_________________________________ 210 to 250.Nitropolymer_________________________________ 210 to 250.Ammonium nitrate:Polyester____________________________________170 to 210. Rubber_____________________________________ 170 to 210.Nitropolymer_________________________________ 210 to 250.Double base_______________________________________ 170 to 250.Boron metal components and oxidant____________________ 200 to 250.Lithium metal components and oxidant___________________ 200 to 250.Aluminum metal components and oxidant_________________ 200 to 250.Magnesium metal components and oxidant________________ 200 to250.Perfluoro-type propellants____________________________ 250 and above.1 Some Considerations Pertaining to Space Navigation, Aerojet-General Corp.. Special Rept. No. 1460, may 1958.

Liquid oxygen is the standard oxidizer used in the largest United States rocket engines. It is chemically stable and noncorrosive, but its extremely low temperature makes pumping, valving, and storage difficult. If placed in contact with organic materials, it may cause fire or an explosion.

Nitric acid and nitrogen tetroxide are common industrial chemicals. Although they are corrosive to some substances, materials are available which will safely contain these fluids. Nitrogen tetroxide, since it boils at fairly low temperatures, must be protected to some degree.

ASTRONAUTICS AND ITS APPLICATIONS 45

Liquid fluorine is a very low temperature substance, comparable with liquid oxygen, and is highly toxic and corrosive as well. Furthermore, its products of combustion are extremely corrosive and dangerous; hence, the use of fluorine raises problems in testing and operating rocket engines.

Most liquid fuels, with the exception of hydrogen, are closely alike in performance and handling. They are usually quite tractable substances. Hydrogen, however, exists as a liquid only at extremely low temperatures-lower even than liquid oxygen; hence, it is very difficult to handle and store. Also, if allowed to escape into the air, it can form a highly explosive mixture. It is a very bulky substance, about one-fourteenth as dense as water. Nonetheless, it offers the best performance of any of the liquid fuels.

D. LIQUID-CHEMICAL MONOPROPELLANTS

Certain unstable, liquid chemicals which, under proper conditions, will decompose and release energy, have been tried as rocket propellants. Their performance, however, is inferior to that of bipropellants or modern solid propellants, and they are of most interest in rather specialized applications, like small control rockets. Outstanding examples of this type of propellant are hydrogen peroxide and ethylene oxide.1

E. COMBINATIONS OF THREE OR MORE CHEMICAL PROPELLANTS

The use of more than two chemicals as propellants in rockets has never received a great deal of attention, and is not considered advantageous at present. Occasionally a separate propellant is used to operate the gas generator which supplies the gas to drive the turbopumps of liquid rockets. In the V-2, for example, hydrogen peroxide was decomposed to supply the hot gas for the main turbopumps, although the main rocket propellants were alcohol and liquid oxygen.

F. FREE-RADICAL PROPELLANTS

If certain molecules are torn apart, they will give up large amounts of energy upon recombining. It has been proposed that such unstable fragments, called free radicals, be used as rocket propellants. The difficulty is, however, that these species tend to recombine as soon as they are formed; hence, a central problem in their use is development of a method of stabilization. Atomic hydrogen is the most promising of these substances. Use of atomic hydrogen might yield a specific impulse of about 1,200 to 1,400 seconds.2

G. WORKING FLUIDS FOR NONCHEMICAL ROCKETS

Devices such as the nuclear rocket must use some chemical as a working fluid or propellant, although no energy is supplied to the rocket by any chemical reaction. All the heat comes from the reactor. Since the prime consideration is to minimize the molecular weight of the exhaust gas, liquid hydrogen is the best substance so far considered

1 North American Aviation, Inc., press release NL-45, October 15,1958.

2 Outer space Propulsion Using Nuclear Energy, hearings before subcommittees of the Joint Committee on Atomic Energy, Congress of the United States 85th Cong., 2d sess., January 22, 23, and February 6, 1958, Lt. Col. P. Atkinson, p. 145.

46 ASTRONAUTICS AND ITS APPLICATIONS

, and it does not seem likely that any substance with superior performance can be found. The problems of handling liquid hydrogen are the same for the nuclear rocket as for the chemical rocket.

Another substance mentioned for use as a propellant in the nuclear rocket is ammonia. While offering only about one-half the specific impulse of hydrogen for the same reactor temperature as a consequence of its greater molecular weight, it is a liquid at reasonable temperatures and is easily handled. Its density is also much greater than hydrogen, being about the same as that of gasoline.

Propellants that would be suitable for use in electric propulsion devices are the easily ionized metals. The one most generally considered is cesium; next best are rubidium, potassium, sodium, and lithium.

H. UNCONVENTIONAL PROPELLANT PACKAGING

Some unconventional approaches in the propellant field include the following:

3 Encapsulated Liquid Fuel Study Initiated, Aviation Week, vol. 69, No. 19, November 10, 1958, p. 29.

PREVIOUS | NEXT | ADDITIONAL LINKS | APPENDIX